Изборник Затворити

3D model: Knob for metallic 1/4″‘-20 photo nut (screw)

Скраћена веза: https://pedja.supurovic.net/veza/10492

Knob adapter to 1/4″-20 photo nut. Uses metallic nut easily available, version that has wire hook. Wire hook is removed and only nut body is used.

Prints in two parts that fit together and need to be glued after metallic nut is inserted.

When inserting metallic nut into plastic cap, pay attention that nut has two side holes left after wire is removed and cap has two small bumps that should snap into those holes. align them.

This allows you to have metallic screw with nice and practical plastic knob.

Download model from:



Check how it is printed:

[ ... види цео чланак ... ]

3D model: Hand circular cutter, cutting depth limiter

Скраћена веза: https://pedja.supurovic.net/veza/10484

I have hand circular cutter made by Parkside (model HG02867). It is useful for cutting rubber, plastic or paper sheets, fiber and similar materials.

I wanted to use it to cut stickers printed on self adhesive paper. Problem was, that it cuts stickers all the way. I want to cut just sticky part. So I made this add-on for the tool that allows me to set cutting depth. It works fine. You can have two sheets of paper on top of each other and set cutting depth to cut just upper one.

Designing this was easy. Tool already had suitable hole where I heat inserted common M4 hex nut using soldering iron (curled brass inset would fit too). […]
[ ... види цео чланак ... ]

3D model: 1/4″-20 nut (screw) for photo camera mount

Скраћена веза: https://pedja.supurovic.net/veza/10458

1/4″-20 threaded screw used for photography equipment. This is meant to be 3D printed as replacement for metal screws for non vital usage. Do not trust these to carry heavy and expensive equipment.

Four types are available. Slight differences are in dimensions and shape of handle wheels.

Donwnload models from:



[ ... види цео чланак ... ]

Уградња конектора за пуњење батерије у Monster Truck играчку

Скраћена веза: https://pedja.supurovic.net/veza/10210

Да ми је неко причао да ћу под старе дане да се бавим преправкама аутића на даљинско управљање, не бих му баш веровао. Јакша је недавно добио један такав Monster Truck. Кинеска производња, наравно, па је батерија прилично лоша. Хајде што мора свако мало да се пуни, него се батерија мора извадити из аутића, прикључити на пуњач да се напуни па онда вратити назад. На све то поклопац батерија има завртањ, а пакет батерија се спаја преко конектора који није баш лако одспојити. Прилично сморно, сложићете се.

RC Monster Truck прикључен на пуњач

Пошто је цео посао пуњења батерија спао на мене, то се бацих у размишљање како да ту муку скинем с грбаче. […]
[ ... види цео чланак ... ]

3D Print: Circle cutter adapter for Dremel/Proxxon router/grinder

Скраћена веза: https://pedja.supurovic.net/veza/10091

I needed to cut holes for speakers but also to carve notch for speaker edge to fit in. As I did not have proper tool for that job I had to make it on my own. As I already had cutting guide adapter for my Proxxon grinder I decided to make an adapter for it using 3D printer. It was actually adapter for Dremel tool with customization to fit Proxxon, so new tool may be used with both Proxxon and Dremel grinders.

I did modeling in FreeCAD and printed it on my Prusa MK3S 3D printer. It did a job surprisingly well. […]
[ ... види цео чланак ... ]

3d model: Zip Tie Pin Holder (customizable)

Скраћена веза: https://pedja.supurovic.net/veza/10053

This is customizable zip tie holder for mounting of pictures or electronic devices at poles or similar objects. It uses mounting hole at the back of object meant to be hanged on nail or screw onto the wall.

I needed way to mount temperature and humidity meter on LACKE housing for my 3D printer. I did not want to drill holes so I got an idea to use zip ties. I needed adapter. So here is the model.

It is done in OpenSCAD and made customizable so you can easily adapt it for any zip tie size and also any mounting hole size. […]
[ ... види цео чланак ... ]