Изборник Затворити

3D model Aluminum profile 15180×300 (for CNC 3018)

Скраћена веза: https://pedja.supurovic.net/veza/10014

I needed 3D model of aluminum profile 15180 used for CNC 3018. As I could not find it, I had to make model myself. Dimensions: 15 x 180 x 300 mm.

It is based on this drawing:

I made it available for others, if they need it.

https://www.thingiverse.com/thing:4606478

https://www.prusaprinters.org/prints/41542-aluminum-profile-15180×300-cnc-3018

 […]
[ ... види цео чланак ... ]

Simplified CNC Milling Calculator

Скраћена веза: https://pedja.supurovic.net/veza/9871

Deciding what milling parameters to use can be tricky task, especially for less experienced people like me. Most of the information regarding CNC milling are related to professional equipment and may be quite detailed, hard to follow and not quite applicable to hobby machines. When you use small hobby machine, you are usually on your own. While investigated this I gathered some info that may be useful for others too, so I am sharing it.

The most simple way to deal with setting milling parameters is targeting optimal chip load. Chips are particles of material that milling tool cuts from the body of the material. […]
[ ... види цео чланак ... ]

MFJ-945E custom side plate with mounting holes – 3D printed

Скраћена веза: https://pedja.supurovic.net/veza/9827

I plan to use my MFJ-945E antenna tuner in portable setup but it does not have any mounting hole. It has plastic side plates, so I decided to replace them with custom designed and 3D printed plates with holes and built-in M4 bolts needed for easy fixation in frame. It is snap in replacement for original plastic side plates.

Printed it in black PETG filament and it ended up looking good. Now this device is ready to be mounted in frame for my portable radio-station.

More details: https://www.thingiverse.com/thing:4524293

 […]
[ ... види цео чланак ... ]

Traffic (street) signs (3D print)

Скраћена веза: https://pedja.supurovic.net/veza/9778

These are 3D models of various shaped traffic signs i did for my son.

Poles are separate from sign tables for easier printing. Once printed sign snaps on to pole. You may glue it but it is not necessary.

Sign height including pole is about 65 mm.

Intention is to print sign stickers on paper in color and glue them to the sign tables.

You can get models and more details from https://www.thingiverse.com/thing:4394933.

 […]
[ ... види цео чланак ... ]

eBox Filament Dryer Storage Box User Guide

Скраћена веза: https://pedja.supurovic.net/veza/9770

eSUN eBox is multifunctional filaments storage box. It has three functions:

– Heating and drying filament

– Moisterproof and dustrpoof storage

– Weighting filament

After I misplaced User Manual i found ut it is not available for download nowhere on the Internet. If you end up in the same situation here it is: Download eBox User Guide

 […]
[ ... види цео чланак ... ]

Knob with knurled surface for CNC 3018 X and Y axis (3D print)

Скраћена веза: https://pedja.supurovic.net/veza/9763

I stumbled upon model for bolt and nut with knurled interface https://www.thingiverse.com/thing:9095. I liked how it looks so I decided to adjust nut model and make it to become hand wheels knob for my CNC 3018 X and Z axis. It turned out pretty good.

Knob radius is 24 mm and thickness is 10 mm. It is meant to be used on 8 mm lead screw so it has 8.1 mm hole which is big enough that knob tightly sits on leading screw so it can easily turn leading screw.

There are holes for 3 mm screws if there is need to additionally secure knob on the lead screw.

 […]
[ ... види цео чланак ... ]