Изборник Затворити

3D model: 3×1 mini macro keyboard under table mount

Скраћена веза: https://pedja.supurovic.net/veza/10941

I got myself mini keyboard with three keys and rotating encoder . Idea was to use it to control sound volume and media player on my PC without need to open applications. Keyboard was supposed to be mounted under desk table within hand reach. So I had to do mount for it.

Keyboard has USB-C connector on the top which is awkward for connecting cable. I had one angled USB-C male to female adapter so I used it to redirect cable connection.

As keyboard has double glue tape on the bottom it can be simply glued to the mount but I decided to use screws instead. […]
[ ... види цео чланак ... ]

3D model: 1/4″-20 nut (screw) for photo camera mount

Скраћена веза: https://pedja.supurovic.net/veza/10458

1/4″-20 threaded screw used for photography equipment. This is meant to be 3D printed as replacement for metal screws for non vital usage. Do not trust these to carry heavy and expensive equipment.

Four types are available. Slight differences are in dimensions and shape of handle wheels.

Donwnload models from:



[ ... види цео чланак ... ]

Уградња конектора за пуњење батерије у Monster Truck играчку

Скраћена веза: https://pedja.supurovic.net/veza/10210

Да ми је неко причао да ћу под старе дане да се бавим преправкама аутића на даљинско управљање, не бих му баш веровао. Јакша је недавно добио један такав Monster Truck. Кинеска производња, наравно, па је батерија прилично лоша. Хајде што мора свако мало да се пуни, него се батерија мора извадити из аутића, прикључити на пуњач да се напуни па онда вратити назад. На све то поклопац батерија има завртањ, а пакет батерија се спаја преко конектора који није баш лако одспојити. Прилично сморно, сложићете се.

RC Monster Truck прикључен на пуњач

Пошто је цео посао пуњења батерија спао на мене, то се бацих у размишљање како да ту муку скинем с грбаче. […]
[ ... види цео чланак ... ]

3D Print: Circle cutter adapter for Dremel/Proxxon router/grinder

Скраћена веза: https://pedja.supurovic.net/veza/10091

I needed to cut holes for speakers but also to carve notch for speaker edge to fit in. As I did not have proper tool for that job I had to make it on my own. As I already had cutting guide adapter for my Proxxon grinder I decided to make an adapter for it using 3D printer. It was actually adapter for Dremel tool with customization to fit Proxxon, so new tool may be used with both Proxxon and Dremel grinders.

I did modeling in FreeCAD and printed it on my Prusa MK3S 3D printer. It did a job surprisingly well. […]
[ ... види цео чланак ... ]

3d model: Zip Tie Pin Holder (customizable)

Скраћена веза: https://pedja.supurovic.net/veza/10053

This is customizable zip tie holder for mounting of pictures or electronic devices at poles or similar objects. It uses mounting hole at the back of object meant to be hanged on nail or screw onto the wall.

I needed way to mount temperature and humidity meter on LACKE housing for my 3D printer. I did not want to drill holes so I got an idea to use zip ties. I needed adapter. So here is the model.

It is done in OpenSCAD and made customizable so you can easily adapt it for any zip tie size and also any mounting hole size. […]
[ ... види цео чланак ... ]

3D model: Universal Mounting Mask for LCD Modules

Скраћена веза: https://pedja.supurovic.net/veza/10032

This is OpenSCAD customizer that allows creating universal mounting masks for LCD modules. It is suitable for the most popular LCD display modules used in hobby electronics.

There are number of parameters that may be set. However, most of them are set by default to appropriate values. Usually you just need to set dimensions of LCD module.

By default, customizer creates not only mask but also models for mounting plate with matching hole for the mask, simplified model of LCD module and protective glass insert. These can be handy while while setting mask parameters in Customizer.

You can turn of rendering of unnecessary models. […]
[ ... види цео чланак ... ]