Izbornik Zatvoriti

3D Print: Circle cutter adapter for Dremel/Proxxon router/grinder

Skraćena veza: https://pedja.supurovic.net/veza/10091

I needed to cut holes for speakers but also to carve notch for speaker edge to fit in. As I did not have proper tool for that job I had to make it on my own. As I already had cutting guide adapter for my Proxxon grinder I decided to make an adapter for it using 3D printer. It was actually adapter for Dremel tool with customization to fit Proxxon, so new tool may be used with both Proxxon and Dremel grinders.

I did modeling in FreeCAD and printed it on my Prusa MK3S 3D printer. It did a job surprisingly well. […]
[ ... vidi ceo članak ... ]

3d model: Zip Tie Pin Holder (customizable)

Skraćena veza: https://pedja.supurovic.net/veza/10053

This is customizable zip tie holder for mounting of pictures or electronic devices at poles or similar objects. It uses mounting hole at the back of object meant to be hanged on nail or screw onto the wall.

I needed way to mount temperature and humidity meter on LACKE housing for my 3D printer. I did not want to drill holes so I got an idea to use zip ties. I needed adapter. So here is the model.

It is done in OpenSCAD and made customizable so you can easily adapt it for any zip tie size and also any mounting hole size. […]
[ ... vidi ceo članak ... ]

3D model: Universal Mounting Mask for LCD Modules

Skraćena veza: https://pedja.supurovic.net/veza/10032

This is OpenSCAD customizer that allows creating universal mounting masks for LCD modules. It is suitable for the most popular LCD display modules used in hobby electronics.

There are number of parameters that may be set. However, most of them are set by default to appropriate values. Usually you just need to set dimensions of LCD module.

By default, customizer creates not only mask but also models for mounting plate with matching hole for the mask, simplified model of LCD module and protective glass insert. These can be handy while while setting mask parameters in Customizer.

You can turn of rendering of unnecessary models. […]
[ ... vidi ceo članak ... ]

MFJ-945E custom side plate with mounting holes – 3D printed

Skraćena veza: https://pedja.supurovic.net/veza/9827

I plan to use my MFJ-945E antenna tuner in portable setup but it does not have any mounting hole. It has plastic side plates, so I decided to replace them with custom designed and 3D printed plates with holes and built-in M4 bolts needed for easy fixation in frame. It is snap in replacement for original plastic side plates.

Printed it in black PETG filament and it ended up looking good. Now this device is ready to be mounted in frame for my portable radio-station.

More details: https://www.thingiverse.com/thing:4524293

 […]
[ ... vidi ceo članak ... ]

Traffic (street) signs (3D print)

Skraćena veza: https://pedja.supurovic.net/veza/9778

These are 3D models of various shaped traffic signs i did for my son.

Poles are separate from sign tables for easier printing. Once printed sign snaps on to pole. You may glue it but it is not necessary.

Sign height including pole is about 65 mm.

Intention is to print sign stickers on paper in color and glue them to the sign tables.

You can get models and more details from https://www.thingiverse.com/thing:4394933.

 […]
[ ... vidi ceo članak ... ]

eBox Filament Dryer Storage Box User Guide

Skraćena veza: https://pedja.supurovic.net/veza/9770

eSUN eBox is multifunctional filaments storage box. It has three functions:

– Heating and drying filament

– Moisterproof and dustrpoof storage

– Weighting filament

After I misplaced User Manual i found ut it is not available for download nowhere on the Internet. If you end up in the same situation here it is: Download eBox User Guide

 […]
[ ... vidi ceo članak ... ]