Изборник Затворити

3D model: Universal Mounting Mask for LCD Modules

This is OpenSCAD customizer that allows creating universal mounting masks for LCD modules. It is suitable for the most popular LCD display modules used in hobby electronics.

There are number of parameters that may be set. However, most of them are set by default to appropriate values. Usually you just need to set dimensions of LCD module.

By default, customizer creates not only mask but also models for mounting plate with matching hole for the mask, simplified model of LCD module and protective glass insert. These can be handy while while setting mask parameters in Customizer.

You can turn of rendering of unnecessary models. […]
[ ... види цео чланак ... ]

ЛЦД ЕСР тестер – мултиметар

lcd-esr-tester-meter

Замислите да можете да имате универзалним мерни инструмент који мери све: отпорност, капацитет, индуктивтет, диоде (обичне и зенер), транзисторе (биполарне, ФЕТ, МОСФЕТ, ЈФЕТ), тиристоре…

Отиђите у маштарији још даље: зар не би било сјајно да не морате уопште да се цимате него просто убодете компоненту у инструмент а он сам препозна шта сте уболи и измери карактеристике?

И поврх свега, да то лепо прегледно прикаже на екрану?

Луда идеја, али још је луђе да то у ствари постоји и то чак ради и више него што сте измаштали. А најлуђе је што је врло јефтино. Овакав тестер кошта око 15 до 20 долара, а мери малтене све што убодете у њега. […]
[ ... види цео чланак ... ]

How to use Baofeng UV-B5 flash light switch for LCD background light

Soon after I got him this nice walkie-talkie, my brother Nenad (YU1TTL) quickly found out how to overcome missing feature of UV-B5: LCD background light is turned on only when some keys are pressed and stays on far a very short time. He managed to use flash switch which is used in UV-B6 version but in UV-B5 has no function.

He decided to put up instructions on my blog so others can benefit of this modification. So here it is:

How to use Baofeng UV-B5 flash light switch for LCD background light

by Nenad Supurović YU1TTL

These are instructions for disassembling Baofeng UV-B5 walkie-talkie and also how to modify it to enable the third (Flash light) button to switch the LCD and keyboard back-light on/off

Disassembling:

1. […]
[ ... види цео чланак ... ]