Izbornik Zatvoriti

3D model: Universal Mounting Mask for LCD Modules

Skraćena veza: https://pedja.supurovic.net/veza/10032

This is OpenSCAD customizer that allows creating universal mounting masks for LCD modules. It is suitable for the most popular LCD display modules used in hobby electronics.

There are number of parameters that may be set. However, most of them are set by default to appropriate values. Usually you just need to set dimensions of LCD module.

By default, customizer creates not only mask but also models for mounting plate with matching hole for the mask, simplified model of LCD module and protective glass insert. These can be handy while while setting mask parameters in Customizer.

You can turn of rendering of unnecessary models. […]
[ ... vidi ceo članak ... ]

LCD ESR tester – multimetar

Skraćena veza: https://pedja.supurovic.net/veza/8105

lcd-esr-tester-meter

Zamislite da možete da imate univerzalnim merni instrument koji meri sve: otpornost, kapacitet, induktivtet, diode (obične i zener), tranzistore (bipolarne, FET, MOSFET, JFET), tiristore…

Otiđite u maštariji još dalje: zar ne bi bilo sjajno da ne morate uopšte da se cimate nego prosto ubodete komponentu u instrument a on sam prepozna šta ste uboli i izmeri karakteristike?

I povrh svega, da to lepo pregledno prikaže na ekranu?

Luda ideja, ali još je luđe da to u stvari postoji i to čak radi i više nego što ste izmaštali. A najluđe je što je vrlo jeftino. Ovakav tester košta oko 15 do 20 dolara, a meri maltene sve što ubodete u njega. […]
[ ... vidi ceo članak ... ]

How to use Baofeng UV-B5 flash light switch for LCD background light

Skraćena veza: https://pedja.supurovic.net/veza/7318

Soon after I got him this nice walkie-talkie, my brother Nenad (YU1TTL) quickly found out how to overcome missing feature of UV-B5: LCD background light is turned on only when some keys are pressed and stays on far a very short time. He managed to use flash switch which is used in UV-B6 version but in UV-B5 has no function.

He decided to put up instructions on my blog so others can benefit of this modification. So here it is:

How to use Baofeng UV-B5 flash light switch for LCD background light

by Nenad Supurović YU1TTL

These are instructions for disassembling Baofeng UV-B5 walkie-talkie and also how to modify it to enable the third (Flash light) button to switch the LCD and keyboard back-light on/off

Disassembling:

1. […]
[ ... vidi ceo članak ... ]